Re: [pmfirewall] VPN Setup

Date view Thread view Subject view Author view

From: Johannes B. Ullrich (euclidian@euclidian.com)
Date: Thu May 03 2001 - 06:24:26 PDT

make sure you have the ip_masq_pptp module loaded.
(to verify: lsmod , to load it: modprobe ip_masq_pptp ).
I am not sure if it comes with RH 6.1.

I may have the module around for RH 6.1 in case you can't
find it. 

---
Johannes Ullrich            Join http://www.dshield.org
jullrich@euclidian.com
GPG Key ID: AE692033  Key: http://johannes.homepc.org/pgp.htm
---

On Thu, 3 May 2001, Bill Hess wrote:

> At home I have Redhat 6.1 and cannot seem to get my firewall setup to work
> with a VPN connection.  I am using a Windows NT 4.0 box inside my firewall
> to access a Windows NT VPN Server outside the firewall.  I went thru all of
> the emails in the archives on this (I think I read them all) and I still
> could not get it to work.  I read about something needed to be done with the
> kernel - Mine is out of the box RH 6.1 - Do I need a kernel upgrade?
> In another network I administer at work, I have a router which acts as my
> firewall and I set it to redirect incoming PPTP (Port 1723) packets to one
> workstation which I use to get out to the same VPN server and it works - I
> also tried this on my RH 6.1 router at home and it did not work.
> 
> Anyone have the ipchains lines for this or any ideas?  Thanks in advance....
> 
> Bill Hess - Technology Resource Group
> 
> 
> 
> ****************************************************************************
> * To UNSUBSCRIBE from the list, send a message with "unsubscribe pmfirewall"
> * in the message body to majordomo@pointman.org. Please direct other
> * questions, comments, or problems to pmfirewall-owner@pointman.org.
> *
> *           Need answers fast? Check the list archive located at:
> *             http://www.pointman.org/PMFirewall/list-archive/
> *
> 

****************************************************************************
* To UNSUBSCRIBE from the list, send a message with "unsubscribe pmfirewall"
* in the message body to majordomo@pointman.org. Please direct other
* questions, comments, or problems to pmfirewall-owner@pointman.org.
*
*           Need answers fast? Check the list archive located at:
*             http://www.pointman.org/PMFirewall/list-archive/
*

Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Sun Jun 10 2001 - 02:41:33 PDT